Nutanix : Free Certifications Voucher - Take 2

Background

Always wanted to give a try to a Nutanix examen but you cannot afford it ? (between $99 and $199). Your company does not want to pay for it ? There are discounts from time to time, but you need to prepare for the exam, they are not super easy.  Ok, I have a good news for you !

Voucher !!!!

Nutanix University gave me a voucher for some popular exams, YES ! So, if you have in mind to try the following exams : NCA and NCP. Do not hesitate and register today !

The following voucher is available until May 30th Midnight PST. It can only be used once. So, if you are planning to pass one of the exam above, chose carefully.

H8837ASG

Register on https://www.nutanixuniversity.com/learn, enroll for the training and register for the exam between May 1st and May 30th. But, of course, the exam can be scheduled AFTER May 30th, so you have time to prepare. You actually have until June 30th to attempt passing the exam.

If you already failed in the past and want to try it again, this is also a very good opportunity ;)

Good luck everybody, and do not hesitate to comment below to let us know the result !

I hope this help ;)



Comments

  1. AnonymousTuesday, June 13, 2023 at 9:37:00 AM GMT+2

    Sir can you please give another voucher i really want to gice this exam this month.

    ReplyDelete
    Replies
    1. Let's Talk About Tech!Tuesday, June 13, 2023 at 9:39:00 AM GMT+2

      Sorry, I don't have others ... You can search the web and follow Nutanix University on Twitter (@NutanixEDU) ... sometimes, they release a new code.

      Delete

Post a Comment

Thank you for your message, it has been sent to the moderator for review...

What's hot ?

Wallbox : Get The Most Of It (with API)

Image
Background Two month ago, I got myself a PHEV (Plug In Hybrid Electric Vehicle) and of course, thinking at the future, I also installed a class-2 charger at home. The obvious choice to me was the Wallbox Pulsar Plus charger. Small form factor, easy to set up, affordable and reliable. Wallbox software offering is great : centralized statistics on their website, mobile app, ... everything. But, is there any API available ? ;)
Read more

PCBWay : CNC Machining

Image
Background My 3D Printed CNC machine project has been sitting in my basement for over a year now. Unfortunately, some of the parts turned out to be too weak with the 3D printing technique, and I needed to find a solution. Ideally, I needed metal or aluminum parts that could support the constraints of the belt. I searched for an affordable online CNC service for a long time, but it wasn't until a few weeks ago that I finally succeeded.
Read more